Product Categories
(Total 12 Products for Pa6 Black Chips)
YARN USE in-situ semi-dull PA6 black film
The first batch of yarns produced in the world use Pa6 Black Chips.
Principle: dye and melt are fully mixed during polymerization of In situ Pa6 Black Chips, and colored yarn is obtained by spinning.
Advantages: Yarn Use Pa6 Black Chips will not dye after weaving and will not discharge dyeing sewage. It will save...
Low Viscosity R.V2.45 PA6 Chips
Nylon is a man-made fiber, while nylon 6 is chemically a condensation polymer. Nylon Pa6 is composed of carbon, hydrogen and oxygen, and then hexamethylenediamine and adipic acid are synthesized. These chemicals mix and polymerize into nylon. Polyamide Nylon 6 is also commonly referred to as nylon or polyamide fibers....
bringht virgin high fiow r.v2.45 polyamide6 slice
Nylon 6 particle viscosity is 2.0 to 3.45. The advantages of Virgin Pa6 Granules Textile Grare are good appearance, good spinnability, high strength and good dyeing properties. Polyamide6 Pellets Exporter uses high-end liquid raw materials imported from the United States, Japan, the Netherlands, etc., and adopts VK...
HIGH MELT FLOW RATE BRIGHT PA6 CHIPS R.V2.0
Bright Nylon 6 Chips are widely used in engineering plastics and textile grades. Its viscosity range is 2.0 to 3.45. The advantages of nylon 6 sheets are good appearance, good spinnability, high strength and good dyeing performance. The nylon 66 we produce adopts high-end liquid materials imported from the United...
Good looking low viscosity PA6 chips
Polyamide Nylon 66 is mainly used for synthetic fibers, and its most prominent advantage is that its abrasion resistance is higher than that of all other fibers, 10 times higher than cotton abrasion resistance, 20 times higher than wool, slightly adding some polyamide fibers in blended fabrics, It can greatly improve...
BRIGHT PA6 CHIPS R.V2.45 FOR ENGINEERING PLASTIC
Colored 420d nylon yarn is widely used in engineering plastics and textile grades. Nylon6 Yarn For Rope has a viscosity of 2.0 to 3.45. High-strength 420d nylon yarn has the advantages of good appearance, good spinning performance, high strength and good dyeing performance. We use high-end liquid materials imported...
BRIGHT R.V2.45 NYLON6 CHIPS FOR MODIFIED POLYMER
Polyamide 6 chips are commonly known as nylon 6 chips and nylon 6 chips. Because the macromolecules contain amide bonds (-C-NH-), they are called polyamides. Nylon 6 is usually white columnar particles with a melting point of 210-220°C and a decomposition temperature of about 300°C. Polyamide nylon 66 is soluble in...
SEMI DULL NYLON6 CHIPS FOR TEXTILE GRADE
Bright Nylon 6 Chips are widely used in engineering plastics and textile grades. Semi Dull Nylon 6 Chips have a viscosity of 2.0 to 3.45. The advantages of Bright Nylon 6 Chips are good appearance, good spinnability, high strength and good dyeability. The products we produce are imported from the United States, Japan,...
SEMI DULL BRIGHT POLYAMIDE6 CHIPS FOR TEXTILE FILED
Polyamide Nylon 66 glass fiber reinforced material can be added with glass fiber content in the range of 5-60% according to the characteristics of the product. Polyamide Nylon 6 has good strength, heat resistance, excellent impact resistance, good dimensional stability and Low warpage, etc. Polyamide6 Pellets Exporter...
BRIGHT PA6 native chips for engineering plastics
Physical properties: Polyamide Nylon 6 slices, commonly known as Nylon 6 slices, Nylon 6 slices. Because macromolecules contain amide bonds (one CO—NH—), they are called polyamides. Nylon 6 slices are usually white columnar granules with a melting point of 210-220 °C and a decomposition temperature of about 300 °C. It...
Nylon 6 Chips, because the macromolecules contain amide bonds (one CO—NH—), so they are called polyamides. Nylon 6 slices are usually white columnar particles with a melting point of 210-220 °C and a decomposition temperature of about 300 °C. It is soluble in phenol and hot concentrated sulfuric acid, and has...
BRIGHT NYLON 6 CHIPS FOR ENGINEERING PLASTICS GRADE R.V 3.8
BRIGHT NYLON 6 CHIPS FOR ENGINEERING PLASTICS GRADE R.V 3.8 HY-3800A PRODUCT DESCRIPTION:
LUBRICATED,NUCLEATED,USING CAPROLACTAM AS RAW MATERIAL,AFTER PLYMERIZATION,EXTRACTION,DRYING AND OTHER PROCESSES,BRIGHT,
R.V 3.8.USED IN THE FIELD OF ENGINEERING PLASTICS GRADE, MODIFIED POLYMER,AND FILM.
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
