Product Categories
(Total 12 Products for Polyamide 6 Primary Granules)
Bright polyamide 6 primary pellets for modified polymers
Polyamide Nylon 66 is widely used in engineering plastics and textile grade. The viscosity of Nylon 66 is 2.0 ～ 3.45. Nylon 66 Material has the advantages of good appearance, good spinning performance, high strength and good dyeing performance. We use high-end liquid materials imported from the United States, Japan,...
HIGH STRENGTH BRIGHT PA6 RESIN RAW MATERIAL
Bright Nylon 6 Chips are widely used in engineering plastics and textile grades. Its viscosity ranges from 2.0 to 3.45. The advantages of Nylon 6 Chips are good appearance, good spinnability, high strength and high dyeing performance. The Nylon 66 we produce adopts high-end high-end liquid materials imported from the...
LOW VOSCOSITY POLYAMIDE6 RAW MATERIAL
Polyamide Nylon 66 is widely used in the manufacture of bearings, circular gears, cams, bevel gears, various rollers, pulleys, pump impellers, fan blades, worm gears, propellers, screws, nuts, gaskets, high-pressure seals, oil-resistant in industrial production Gaskets, oil-resistant containers, housings, hoses, cable...
SEMI DULL HIGH SPINNNG PERFORMANCE POLYAMIDE6 CHIPS
The main varieties in nylon are Nylon 6 and Nylon 66, which are absolutely dominant, followed by Nylon Pa6, nylon 12, nylon 610, nylon 612, in addition to nylon 1010, nylon 46, nylon 7, nylon 9, nylon 13, new The varieties are nylon 6I, nylon 9T and special nylon MXD6 (barrier resin), etc. There are many modified...
LOW VISCOSITY POLYAMIDE6 RESIN
Bright Nylon 6 Chips are widely used in engineering plastics and textile grades. Semi Dull Nylon 6 Chips have viscosities from 2.0 to 3.45. The advantages of Bright Nylon 6 Chips are good appearance, good spinnability, high strength and high dyeability. The products we produce are imported from the United States,...
High strength polyamide 6 pellets
Bright Nylon 6 Chips are widely used in engineering plastics and textile grades. Semi Dull Nylon 6 Chips have viscosities from 2.0 to 3.45. The advantages of Bright Nylon 6 Chips are good appearance, good spinnability, high strength and high dyeability. The products we produce are imported from the United States,...
BRIGHT PA6 CHIPS R.V2.45 FOR ENGINEERING PLASTIC
Colored 420d nylon yarn is widely used in engineering plastics and textile grades. Nylon6 Yarn For Rope has a viscosity of 2.0 to 3.45. High-strength 420d nylon yarn has the advantages of good appearance, good spinning performance, high strength and good dyeing performance. We use high-end liquid materials imported...
Bright PA6 Granules for Engineering Plastics
The main varieties of polyamide fibers (aliphatic) are Nylon 66 and Nylon 6, the latter also known as nylon. They have high strength, good resilience, the highest abrasion resistance among textile fibers, and the resistance to multiple deformation and fatigue is close to that of polyester and higher than other fibers....
Semi-dull nylon for FDY yarn 6 grains
Nylon 6 Chips, also known as Nylon 6 Chips, are colorless and transparent cylindrical particles with uniform particle size without mechanical impurities. Nylon 6 slices are soluble in phenol and hot concentrated sulfuric acid, and have excellent electrical insulation properties, good alkali resistance and corrosion...
SEMI DULL BRIGHT POLYAMIDE6 CHIPS FOR TEXTILE FILED
Polyamide Nylon 66 glass fiber reinforced material can be added with glass fiber content in the range of 5-60% according to the characteristics of the product. Polyamide Nylon 6 has good strength, heat resistance, excellent impact resistance, good dimensional stability and Low warpage, etc. Polyamide6 Pellets Exporter...
SEMI DULL POLYAMIDE6 PELLETS FOR SPINNING USAGE
Bright Nylon 6 Chips are widely used in engineering plastics and textile grades. Semi Dull Nylon 6 Chips have viscosities from 2.0 to 3.45. The advantages of Bright Nylon 6 Chips are good appearance, good spinnability, high strength and high dyeability. The products we produce are imported from the United States,...
BRIGHT PA6 native chips for engineering plastics
Physical properties: Polyamide Nylon 6 slices, commonly known as Nylon 6 slices, Nylon 6 slices. Because macromolecules contain amide bonds (one CO—NH—), they are called polyamides. Nylon 6 slices are usually white columnar granules with a melting point of 210-220 °C and a decomposition temperature of about 300 °C. It...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
