HAIYANG TECHNOLOGY CO.,LTD

HAIYANG TECHNOLOGY CO.,LTD

bill@pa6.com.cn

+86-0523-86573926

HAIYANG TECHNOLOGY CO.,LTD
HomeProductsNylon 6 ChipsColored Nylon 6 ChipsYarn using in-situ polyamide 6 black flakes

Yarn using in-situ polyamide 6 black flakes

  • $2
    25-24
    Metric Ton
  • $3.5
    ≥25
    Metric Ton
Payment Type:
L/C,T/T,D/P
Incoterm:
FOB,CFR,CIF,EXW
Min. Order:
1 Metric Ton
Transportation:
Ocean,Land,Air
Port:
SHANGHAI,TAICANG,ZHANGJIAGANG
Share:
Chat Now
  • Product Description
Overview
Product Attributes

Model No.HYS-125

BrandQIUXUE

Place Of OriginChina

Types OfSynthetic Fibers

RELATED VISCOSITY2.45/2.8

ColorRaw White

Packing25kgs Or 800kgs Jumbo Bag

Supply Ability & Additional Information

PackagingTHE INNER LAYER IS ALUMINUM FOIL AND THE OUTER LAYER IS PP OR KRAFT BAGS.

Productivity30000 TONS PER MONTY

TransportationOcean,Land,Air

Place of OriginCHINA

Supply Ability350,000 TONS PER YEAR

CertificateISO9000,ISO14001

HS Code390810

PortSHANGHAI,TAICANG,ZHANGJIAGANG

Payment TypeL/C,T/T,D/P

IncotermFOB,CFR,CIF,EXW

Packaging & Delivery
Selling Units:
Metric Ton
Package Type:
THE INNER LAYER IS ALUMINUM FOIL AND THE OUTER LAYER IS PP OR KRAFT BAGS.
Picture Example:

The world's first to use Functional Nylon 6 Yarn.
Principle: Polyamide Nylon 6 resin textile grade dye and melt are fully mixed in the polymerization process, and dyed yarn is obtained by spinning.
Advantages: The original white Nylon 6 Yarn, the yarn is not dyed, does not discharge dyeing sewage, saves water, energy and environmental protection. Realized green yarn in the true sense, in-situ polymerization, high color fastness, uniform color, no color difference between batches, and improved post-processing efficiency.
feature
1. T 1. Greener
When the black flakes are polymerized in-situ, they will turn black after polymerization, which avoids energy consumption and environmental pollution during the production of color masterbatches.
Reduce the harm of dust to employees during the production of masterbatches
2. No change in equipment
Since the chip is black, it can be directly used to reduce the input of equipment such as main injector. At the same time, this is also the first project in the world to mass-produce in-situ polymerized blackboards.
3. Longer component life
Longer component cycle times and higher yields can be achieved with nanopigments. Generally, the masterbatch spinning assembly needs to be replaced within 15-25 days, but the black part of the in-situ polymerization can be used for 40-60 days, and the assembly pressure is basically unchanged.
2.4. The false twist friction plate has little damage and no damage to the knitting needle
Nano-pigments, dispersed finer, more uniform, and smoother surface. Reduce friction disc damage, needle wear and crochet
3.5. The color is more uniform, no color difference, and the color fastness is higher
In the spinning process, the color difference and low color fastness caused by the uneven addition of color masterbatch are avoided, so that the color uniformity is better and the color is blue. Color fastness reaches 5 (gray card), light fastness, acid and alkali resistance, washing fastness reaches 4.5 (gray card)
6. Anti-static
Its antistatic performance is better than that of white yarn dyeing
The world-renowned Heisen Group has been using the following specifications, and other varieties are being trial-spun for better results

产品类别Description

 锦纶 6 切片

Nylon6 chips

牌号

Grade

 HYS-125

 锦纶 6-原位聚合黑切片

 IN-SITU NYLON6 BLACK CHIPS

检测标准Test standards

 

ISO、FZ/T、ASTM、DIN

检测项目

Properties

单位

Unit

 

 

规格范围 Specification range

检测结果

Values

检测方法

Test method

相对粘度

RV 96% H2SO4

 

 

 

2.45±0.03

 

2.46

 

FZ/T 51004

水分含量

Moisture content

 

%

 

 

≤0.06

 

0.026

 

ISO 15512

萃取物含量

Extract content

 

%

 

 

≤0.6

 

0.16

 

FZ/T 51004

黑度

Blackness

 

 

深黑 Atrous

Yarn using in-situ polyamide 6 black flakes




Product Categories : Nylon 6 Chips > Colored Nylon 6 Chips

Company Overview

BRIGHT NYLON6 CHIPS IS WIDELY USED IN ENGINEERING PLASTIC AND TEXTILE GRADE.ITS VISCOSITY IS FROM 2.0 TO 3.8.ITS ADVANTAGE IS GOOD APPEARANCE, GOOD SPINNING ABILITY,HIGH STRENGTH AND HIGH DYEING PERFORMANCE.WE PRODUCE THE PRODUCT VIA HIGH HIGH-END LIQUID MATERIALS WHICH IS IMPORTED FROM USA, JAPAN, THE NETHERLANDS, ETC., WITH VK CONTINUOUS POLYMERIZATION, UNDERWATER GRANULATION, CONTINUOUS AIRFLOW DRYING, DCS CONTROL AND OTHER TECHNOLOGIES.THE AMINO TERMINAL GROUP, MONOMER CONTENT AND OTHER SPECIFICATION ARE BETTER.

 

Company Photos
Production Certification
Email to this supplier
  • *Subject:
  • *To:
    Mr. bill han
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
HomeProductsNylon 6 ChipsColored Nylon 6 ChipsYarn using in-situ polyamide 6 black flakes
Send Inquiry
*
*

Related Products List

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send