Product Categories
(Total 12 Products for Bright Pa6 R V2 7 Original Grain)
Bright polyamide 6 pellets for composite use
Polyamide 6 Resin Textile Grade for composite use is widely used in engineering plastics and textile grade. The viscosity of Virgin Pa6 Granules Textile Grain is 2.0~3.45. Bright Nylon 6 Chips has the advantages of good appearance, good spinning performance, high strength and good dyeing performance. We use high-end...
BRIGHT PA6 NAKED PELLETS FOR FDY POY PRODUCTION
Nylon is an engineering plastic developed earlier and used in large quantities. Has high impact strength and tensile strength, excellent wear resistance, chemical resistance and solvent resistance. However, due to its high hygroscopicity, the product has poor dimensional stability. In addition, although nylon 6 and...
brightr.v2.45nylon6 granules for polymers
Nylon 66 material is widely used in engineering plastics and textile grades. Polyamide nylon 6 has a viscosity of 2.0 to 3.45. The advantages of nylon 6 UV-resistant yarn are good appearance, good spinnability, high strength and good dyeing performance. The functional nylon 6 yarn we produce adopts high-end liquid raw...
Raw White 1260d Nylon6 Yarn is widely used in engineering plastics and textile grades. Colored Polymaide6 yarns have a viscosity of 2.0 to 3.45. The advantages of Colored Nylon 6 Chips are good appearance, good spinnability, high strength and good dyeing performance. The high-strength 420d nylon yarn we produce adopts...
BRIGHT PA6 R.V2.7 Primary Granules for Polymers
Polyamide nylon 66 is widely used in engineering plastics and textile grades. Nylon 66 has a viscosity of 2.0 to 3.45. The advantages of nylon 66 material are good appearance, good spinnability, high strength and good dyeing performance. The nylon 66 we produce adopts high-end liquid raw materials imported from the...
BRIGHT NYLON6 R.V2.7 Original Granules
Virgin Pa6 Granules Textile Grare is widely used in engineering plastics and textile grades. Textile grade polyamide 6 resins have a viscosity of 2.0 to 3.45. The advantages of Virgin R.v2.45 nylon 6 grains are good appearance, good spinnability, high strength and good dyeing performance. The textile grade polyamide 6...
Bright polyamide 6 R.V2.7 virgin pellets for polymers
Nylon6 Yarn 210d is widely used in engineering plastics and textile grades. Nylon Ht Yarn has a viscosity of 2.0 to 3.45. The advantages of Virgin R.v2.45 nylon 6 grains are good appearance, good spinnability, high strength and good dyeing performance. The colored nylon 6 yarn we produce adopts high-end liquid raw...
BRIGHT R.V2.7 POLYAMIDE6 Bare Particles for Polymers
*Structure: Nylon 6 is polycaprolactam, and nylon 66 is polyhexamethylene adipate. Nylon 66 is 12% harder than nylon 6. In theory, the higher the stiffness, the more brittle the fiber is and the easier it is to break. But in the use of rugs, this tiny difference is indistinguishable.
* Cleanability and stain...
Bright Textile Grade R.V2.45 SD Nylon 6 Grains
The chemical and physical properties of nylon Pa6 are very similar to the polyamide nylon 66, but it has a lower melting point and a wider processing temperature range. Impact and resistance of nylon 66 material
The solubility is better than PA66, but it is also more hygroscopic. Since many quality properties of...
The yarn uses in-situ semi-dull PA6 black particles
The world's first nylon 6 pellets for mass production of yarns
Principle: In-situ Pa6 Black Chips dye and melt are thoroughly mixed during polymerization and spun into colored yarns.
Advantages: Virgin Pa6 Granules Textile Grare does not dye after weaving, does not discharge dyeing wastewater, saves water, energy, and...
Yarns use in-situ PA6 virgin black grain
Nylon 6 is a crystalline polymer material.
Nylon Pa6 is also known as Nylon 6. Its monomer is caprolactam, which is a polymer compound polymerized from caprolactam. Nylon 6 has the characteristics of thermoplasticity, light weight, good toughness, chemical resistance and durability, and is generally used in automobile...
Bright nylon 6 chips are widely used in engineering plastics and textile grade. The viscosity of Polyamide 6 Resin Textile Grade is 2.0 ～ 3.45. The advantages of Injection Grade Nylon 6 Chips are good appearance, good spinning performance, high strength and good dyeing performance. We use high-end liquid materials...
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
