Product Categories
(Total 12 Products for Yarn Use Bright Pa6 Black Slice)
YARN USE IN-SITU BRIGHT PA6 black film
The first batch of yarns produced in the world use Pa6 Black Chips.
Principle: dye and melt are fully mixed during polymerization of In situ Pa6 Black Chips, and colored yarn is obtained by spinning.
Advantages: Yarn Use Pa6 Black Chips will not dye after weaving and will not discharge dyeing sewage. It will save...
Semi-dull polyamide 6 pellet spinning application
Nylon 6 Chips, also known as Nylon 6 Chips, are colorless and transparent cylindrical particles with uniform particle size without mechanical impurities. Nylon 6 slices are soluble in phenol and hot concentrated sulfuric acid, and have excellent electrical insulation properties, good alkali resistance and corrosion...
emi-dull polyamide 6 chips for POY FDY yarn
Nylon 6 Chips, also known as Nylon 6 Chips, are colorless and transparent cylindrical particles with uniform particle size without mechanical impurities. Nylon 6 slices are soluble in phenol and hot concentrated sulfuric acid, and have excellent electrical insulation properties, good alkali resistance and corrosion...
BRIGHT NYLON6 Slicing Equipment for Yarn Production
Pa6, also known as nylon 6, its monomer is caprolactam, which is a polymer compound polymerized from caprolactam. Nylon 6 has the characteristics of thermoplasticity, light weight, good toughness, chemical resistance and durability, and is generally used in automobile parts, mechanical parts, electronic and electrical...
Yarn using in-situ polyamide 6 black flakes
The world's first to use functional nylon 6 yarn.
Principle: Polyamide nylon 6 resin textile grade dye and melt are fully mixed in the polymerization process, and dyed yarn is obtained by spinning.
Advantages: The original white nylon 6 yarn, the yarn is not dyed, does not discharge dyeing sewage, saves water, energy...
Yarn using in-situ semi-dull polyamide 6 black flakes
Nylon 6, also known as polyamide 6 or Nylon Pa6, is a translucent or opaque milky white crystalline polymer. Nylon 6 Chips has the characteristics of good tin resistance, strong wear resistance, oil resistance, earthquake resistance, high mechanical strength and heat resistance, good impact strength, high melting...
Yarn using in-situ polyamide 6 R.V2.45 black flakes
The tensile strength of the material obtained by in-situ polymerization of Nylon 6 and clay mixed system is 1.5 times higher than that of Functional Nylon 6 Yarn, the elastic coefficient is 2 times higher, the thermal deformation temperature is significantly increased by 90 ℃, and the transparency of the material is...
BRIGHT PA6 CHIPS EXPORTER FOR POLYMER PRODUCTION
Nylon is an engineering plastic developed earlier and used in large quantities. Has high impact strength and tensile strength, excellent wear resistance, chemical resistance and solvent resistance. However, due to its high hygroscopicity, the product has poor dimensional stability. In addition, although nylon 6 and...
BRIGHT R.V2.45 POLYAMIDE6 polymer chips
Raw White 1260d Nylon6 Yarn is widely used in engineering plastics and textile grades. Colored Polymaide6 yarns have a viscosity of 2.0 to 3.45. The advantages of Colored Nylon 6 Chips are good appearance, good spinnability, high strength and good dyeing performance. The high-strength 420d nylon yarn we produce adopts...
Bright polyamide 6 slices of engineering plastics
Polyamide 6 chips are commonly known as nylon 6 chips and Nylon 6 chips. Because the macromolecules contain amide bonds (-C-NH-), they are called polyamides. Polyamide Nylon 6 is usually in the form of white columnar particles, with a melting point of 210-220 °C and a decomposition temperature of about 300 °C....
Bright R.V2.7 nylon 6 chip of polymer
High Tenacity 420d Nylon Yarn is widely used in textile grade. The viscosity of Colored Nylon 6 Yarn is between 2.45 and 2.7. Colored 420d Nylon Yarn has the advantages of good appearance, good spinning performance, high strength and good dyeing performance. We use high-end liquid materials imported from the United...
BRIGHT NYLON 6 CHIPS FOR ENGINEERING PLASTICS GRADE R.V 3.8
BRIGHT NYLON 6 CHIPS FOR ENGINEERING PLASTICS GRADE R.V 3.8 HY-3800A PRODUCT DESCRIPTION:
LUBRICATED,NUCLEATED,USING CAPROLACTAM AS RAW MATERIAL,AFTER PLYMERIZATION,EXTRACTION,DRYING AND OTHER PROCESSES,BRIGHT,
R.V 3.8.USED IN THE FIELD OF ENGINEERING PLASTICS GRADE, MODIFIED POLYMER,AND FILM.
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
